Up: Main trebuchet page; Next: Ammunition; Prev: First test

Trebuchet / Unveiling and trebuchet party

The public unveiling and first trebuchet party was on October 13, 2002. The machine performed admirably with no serious engineering failures; the pull-down rope broke but we were able to recover by "fishing" a hook onto the end of the with a long pole. Our farthest throw was 450 feet with a 8 pound bowling ball -- well short of our hopes but that's still quite a ways.

Note that we did throw a couple of pumpkins but didn't get any good pictures of it.

Click on photos to enlarge.

[ammunition.jpg] Supply of ammo lined up and ready to go.

[trebuchet-in-place.jpg] Trebuchet aimed and ready to be filled with counterweight sand on the morning of the shoot.

[pulldown.jpg] Mechanically-assisted pulling down of the throwing arm. At this point the counterweight barrel was about 2/3 full, so the force required to pull down the arm is about 200 pounds.

[unthreading-pulldown.jpg] John gingerly unthreads the pull-down rope from the pulley. Thanks to the new safety this isn't such a touchy operation as it used to be.

[john-at-trigger.jpg] Machine is cocked and ready with John at the trigger.

[mid-throw.jpg] The little white speck in the upper right corner is a milk jug.

[impact.jpg] Impact! Milk jug meets cornfield.

[party-first-throw.jpg] Remains of a thrown milk jug.

[bowling-ball.jpg] Bowling ball and crater.

[apple-monitor.jpg] Remains of an Apple High Resolution Display.

[party.jpg] The machine and party as seen from the drop zone.

[john-preparing-monitor.jpg] John preparing a monitor for flight.

[monitor-post-impact.jpg] Another monitor post-impact.

[sink-4.jpg] Hurling a ceramic bathroom sink. This is part of an 11-image series of the throw, flight, and landing.


Up: Main trebuchet page; Next: Ammunition; Prev: First test
Copyright © 2002 Reid Priedhorsky and John Garbe / reid@reidster.net.
Last modified: 2002-10-14 23:44 CDT